Choosing a Tape Drive

Posted by Linus Chang on: 2005-05-05 14:11:38

Self SEO > Hardware Articles

Tape drives remain the leading technology used by organizations for backup and archiving. However, the plethora of tape drives on the market can make choosing the appropriate tape drive a confusing task. How do you select a tape drive that satisfies your needs without blowing the budget? The following are just some of the main factors to consider.

1. Capacity.

Select a tape drive that has sufficient capacity to store your backups. Tape drives are able to compress data so that more data may fit on the tape, which is why manufacturers specify both a native capacity and a compressed capacity, usually with a compression ratio at 2:1. However, highly-compressed files such as those in video and sound formats are hardly compressible at all. For this reason, do not heed the specified compressed capacity when choosing a tape drive.

A good way to determine the size of the backup job after compression is to study logs of past backups. If these are unavailable, it is safe to assume that the data can be compressed at a ratio of 1.4:1, unless the hard drive contains an usually large number of highly-compressed files.

2. Transfer rate.

The transfer rate of the tape drive is becomes important when there is limited "window of opportunity" in which backup jobs may run. It is often desirable for backups to take place during the night when network use is at its lowest. Select a tape drive that is capable of completing a backup job within your window of opportunity. For instance, to back up 400GB per night, you will require a transfer rate of about 30GB/hour.

A little known fact about tape drives is that data must be supplied to them at a sufficient rate in order to keep them streaming, or else the tape suffers from start-stop motion. This motion severely degrades the life of the drive and tapes and the reliability of backups.

There are two usual reasons why tape drive are not be supplied with data at a sufficient rate. Firstly, the rate at which data is read from the hard disk of the server is insufficient. This rate is dependent on the sizes and locations of the files on disk and is generally unpredictable, but can be determined by the use of specialised software.

Secondly, if data is being transferred over a network of computers to a backup server, the network may be incapable of supplying data at a sufficient rate. The maximum throughput of a network is predictable and easy to measure, based on previous network performance.

Consider a network using 10BaseT Ethernet. This transfer rate through this type of network cannot exceed 10MB/s, so it is immediately apparent that a tape drive requiring 20MB/s is inappropriate.

3. Reliability and duty cycle.

A simple way to gauge the reliability of a tape drive is to find out the Mean Time Between Failure (MTBF) as specified by the manufacturer. You should note, however, that the MTBF is usually specified at a certain duty cycle. For example, consider a Travan tape drive with a MTBF of 370,000 hours at 20% duty cycle. The drive will only have an average of 370,000 hours between failures if it is run less than 20% of the time (about 4.8 hours per day), and running the tape drive for any longer will significantly reduce the reliability of the drive.

4. Price

There is no point purchasing the highest-range tape drive if it's simply too expensive. Consider how much value-for-money the tape drive will give you. Are you willing to pay more for extra performance? Or do you need to sacrifice some performance to save on costs?

If you choose wisely, you should end up with a tape drive that fulfils your organization's needs, without blowing the budget.

About the Author

Linus Chang is a backup expert and the lead developer of BackupAssist -- tape backup software that is simple and affordable, and perfect for small and medium businesses. Protect your Windows servers, including SQL Server and Exchange Server, to tape, REV drive, hard drive, NAS and more, at a fraction of the cost of other backup software. The product website is at http://www.backupassist.com

How to become a super affiliate

Or How I Made Over $15,000 in 7 Days with a List of Only 1,286 Subscribers!

Finally, The First Practical Step-By-Step Guide That Teaches You How To Get SMALL Lists Sucking In Real Money... Real Fast

Insider Secrets Exploited by Only A Handful of Internet Marketers That Generate Thousands… Even Tens of Thousands of Dollars Month After Month... With Tiny Subscriber Bases.

Now You Can Clone This ‘Paint-by Numbers’ System And Rapidly Unleash The Profit Pulling Power Of Yours… Just Minutes From Now!

Print this article

Tell a friend

Choosing a Video Card: PCI-Express or AGP?

Choosing a laptop

Choosing a Clone or a Robot Dog?

Top Three Factors to Consider While Choosing a Data Center for Your Business

OS 101: Suggestions for Choosing an Operating System

Laptops Guide: Choosing a Laptop that is Right for You

Post New Comment

This site does not allow anonymous comments. Registered members can login to participate. Registration is free and takes only a few seconds